-20 St. / 60 Deg. XRP HS-79 PTFE Hose Assy

In stock
SKU
Hx20-01-16
Starting at $240.76

 

-20 XRP HS-79 PTFE Hose Assy

100% Made in the U.S.A. with U.S.A materials: Our pre-assembled HS-79 PTFE hoses are offered in Green Aramid braid, and in Black Hypalon over Aramid braid in hundreds of different configurations and can be used for many different fluid systems.

-20 HS-79 SERIES Pre Assembled PTFE Hoses with XRP HS-79 Hose Ends. Are offered in Green Aramid braid, and in Black Hypalon over Aramid braid. Max Operating Pressure: 100PSI

If you need custom hoses not found in these pre made HS-79 options, please call our Custom Hose Shop at 310 542 0856 and we will process a custom hose order for you. Custom Hoses are processed same day to within 3 business days in most cases.

 

XRP's industry leading smooth bore PTFE crimp hose end for use with HS-79 Hose and Pro Plus hose.

 

HS-79 Ultra-Lite flexible smooth bore PTFE hose assemblies are truly state-of-the-art. 4-ply composite construction is at the core of HS-79's distinctive list of advantages.

HS-79's smooth bore design offers extremely high flow rates, pressure and temperature ratings (-65 to +400F) and lower pressure drop than comparable systems. In addition, HS-79 provides extreme flexibility and ease of installation and cleaning. Tight bend radius and higher vacuum capacity are possible because HS-79 has a higher loop strength.

Moreover, XRP's HS-79 assemblies feature a noticably larger inner diameter. It is this generous inner diameter that gives HS-79 greater flow capacity. But greater flow is only part of the story of optimizing fluid delivery! The characteristics of the flow are critically important to the racer as well. HS-79's smooth bore "non-convoluted" design eliminates boundary layer entrapment and flow disturbance.

HS-79 is compatible with all racing engine fluids, including gas, alcohol, and nitromethane and can be assembled with either 37 degree JIC hose ends or aluminum quick disconnect clamshell couplings. 

NOTE: HS-79 AND HS-79 WITH CSM (HYPALON) ARE NOT INTENDED FOR HYRAULIC IMPULSE OR SUBMERSION APPLICATIONS

FOR LONG-TERM HIGH VACUUM USE AT ELEVATED TEMPERATURES, AN INTERNAL SUPPORT COIL SHOULD BE A CONSIDERATION.

XRP GENERAL DISCLAIMER:

XRP fittings, hose, and hose ends are only for use off public highways, motorsports, powersports, marine, and racing applications. XRP fittings, hose, and hose ends are not for use on Aircraft, and are not FAA approved. XRP hoses are also not Coast Guard approved. All applications for XRP products are at the sole discretion of the consumer.

XRP HS-79 DISCLAIMER:

The use of XRP HS-79 Hose in Aerospace applications is forbidden by the manufacturer. Contact Hydraflow Manufacturing in Fullerton, CA directly for Aerospace applications of HS-79.

This is a controlled item, and therefore is a non-returnable or exchangeable item.

We carry the largest stock levels in the industry. For Defense Department Overnights & A.O.G. Orders, they are usually serviced same day with some exceptions. Cut off times are approximate for all types of orders, please read our shipping policies for processing guidelines.