Earls Perform-O-Flex Stainless Hose Cut-off - 4-ft cut length
Earl's PERFORM-O-FLEX stainless braid-protected synthetic rubber hose is the premium quality racing hose depended on by the top racing teams of every professional sanctioning body in the world. PERFORM-O-FLEX features an inner liner of synthetic rubber. A partial coverage protective sheath of stainless steel braid is embedded in the liner during manufacturing. The reinforced hose liner is then bonded to a full-coverage outer protective sheath of high tensile stainless steel wire braid. Tougher than this, hose doesn't get. Yet Perform-O-Flex, with its inner liner, remains flexible at temperatures between -40 and +350 degrees F. Racing Greats have depended on PERFORM-O-FLEX hose and SWIVEL-SEAL hose ends since 1972. Perform-O-Flex hose is intended for use with Swivel-Seal, Auto-Fit and Auto-Crimp hose ends only. No other Earl's hose ends are intended for use with Perform-O-Flex hose. The use of other manufacturer's hose ends is not recommended. PSI rating is determined by many factors including hose end in use and assembly method.
Features:
| High-Temp. Synthetic Rubber | Brand Earls |
| Stainless Steel Inner Braid | Use with Auto-Crimp, Auto-Fit, Econ-O-Fit, and Swivel-Seal Hose Ends |
| Clean and Fast Flowing | Provides Constant Flow |
| Full Coverage Outer Braid | Mechanical Bond Between Layers |
| Sold 4 feet in continous lengths | Emmision Code 5 |
| Temperature Range -40° to 350° F | Automatic Transmission Fluid, Coolant, Diesel, E85, Methanol/Alcohol, Oil, Pump Gas, and Race Gas |
| Fluid Type Rating - Automatic Transmission Fluid |
✰✰✰✰✰ |
| Fluid Type Rating - Coolant |
✰✰✰✰✰ |
| Fluid Type Rating - Diesel |
✰✰ |
| Fluid Type Rating - E85 |
✰✰ |
| Fluid Type Rating - Methanol/Alcohol |
✰ |
| Fluid Type Rating - Oil |
✰✰✰✰✰ |
| Fluid Type Rating - Pump Gas |
✰✰ |
| Fluid Type Rating - Race Gas |
✰✰✰ |
| Fluid Type Rating - Vacuum |
✰✰✰✰✰ |
| Part # | 400100ERL | 400120ERL |
| Hose Size | 10 AN | 12 AN |
| Inside Diameter | .563" | .688" |
| Max Working PSI | 1250 PSI | 1000 PSI |
| Min. Bend Radius | 4.0" | 4.5" |
| Outside Diameter | .797" | .938" |
Engineer Preferred Fittings, Hose, Hose Ends & Components for Professional Level Projects
