Carburetor Vapor Guard Hose - Pre-cut

Grouped product items
Part # Manufacturer Hose Size Length Carburetor Vapor Guard Hose - Pre-cut Price Qty
761055ERL Earls 5/16 10 ft Carburetor Vapor Guard Hose. 10-ft Pre-cut.
$48.85
- +
761066ERL Earls 3/8 10 ft Carburetor Vapor Guard Hose. 10-ft Pre-cut.
$54.29
- +
762055ERL Earls 5/16 20 ft Carburetor Vapor Guard Hose. 20-ft Pre-cut.
$93.41
- +
762066ERL Earls 3/8 20 ft Carburetor Vapor Guard Hose. 20-ft Pre-cut.
$104.28
- +
Modern fuels are at war with your fuel system. Modern fuels (more than 40 EPA-approved fuel blends in the US alone) include additives that break down traditional rubber hose. This breakdown leads to potentially dangerous leaks & weeping as well as vapors that waste fuel and leave unwanted odors in your shop. Once fuel lines are degraded, hose particles can contaminate and obstruct fuel injectors and carburetor passages. Earl's Vapor Guard hose and hose ends provide a complete, economical solution that virtually eliminates these fuel permeation issues common with most rubber fuel lines. The secret to Earl's Vapor Guard hose is in its layers. The innermost Primary Barrier Layer offers high resistance to heat and aggressive fuels. The middle Earl's Vapor Guard™ Barrier is a Thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The Exterior Cover Barrier provides extreme tolerance to heat and ozone giving Earl's Vapor Guard a three way shield against hose deterioration.

Features:

Multi-layer rubber hose with a liner designed to withstand corrosive modern fuels Brand Earls
Carburetion Hose – Rated Maximum 50 PSI (not for use with fuel injection systems) Use with Vapor Gaurd or Traditional Push-On Hose Ends
Multi-fuel compatible: Approved for use with leaded and unleaded Gasoline, Diesel, Biodiesel, E-85, 100% Methanol, ETHANOL and Gasohol fuels A two foot section of Earl’s Vapor Guard saves one gallon of gas each year as compared to traditional rubber hose from
Primary Barrier Liner – initial layer offers high resistance to heat and aggressive fuels Vapor Guard Barrier – Thermoplastic layer provides superior fuel isolation significantly reducing vapors from escaping through the hose
Reinforcement braid-aramid material – (EFI hose only) is used to provide the higher pressure rating that is required with fuel injection Exterior cover – provides extreme tolerance of heat and ozone
Choose from carburetor or higher pressure EFI hose Hose available in 5/16” and 3/8” sizes
Not for use in applications where the hose is submersed in fuel Emission code 5
Temperature Range -40°F to 275°f Bio-Fuels, Coolant, Diesel, E85, Pump Gas and Race Gas
Sold by 10 feet and 20 feet  
Fluid Type Rating - Bio-Fuels

✰✰✰✰

Fluid Type Rating - Coolant

✰✰✰✰✰

Fluid Type Rating - Diesel

✰✰✰✰

Fluid Type Rating - E85

✰✰✰

Fluid Type Rating - Methanol/Alcohol

✰✰

Fluid Type Rating - Pump Gas

✰✰✰✰

Fluid Type Rating - Race Gas

✰✰✰✰

 

Part # 761066ERL 762066ERL
Hose Size 3/8" 3/8"
Max Vacuum 10 in Hg 10 in Hg
Min Bend Radius 2.5" 2.5"
O.D. 0.625" 0.625"
Part # 761055ERL 762055ERL
Hose Size 5/16" 5/16"
Max Vacuum 10 in Hg 10 in Hg
Min Bend Radius 2.5" 2.5"
O.D. 0.585" 0.585"

 

Engineer Preferred Fittings, Hose, Hose Ends & Components for Professional Level Projects

Preferred Hose and Hose End Selection for Professional Level Projects

We carry the largest stock levels in the industry. For Defense Department Overnights & A.O.G. Orders, they are usually serviced same day with some exceptions. Cut off times are approximate for all types of orders, please read our shipping policies for processing guidelines.