UltraFlex PTFE Stainless Steel Hose - 6-ft Pre-cut
We have taken the same inner tubing of our Kevlar® hose, and covered it with a high tensile grade 304 stainless steel. You still get all of the same flow rate and flexibility advantages of the Kevlar® hose but with additional protection. The carbon lined inner tubing (for static dissipation) is smooth bore with large ID for maximum flow and convoluted exterior support for incredible flexibility. Ultra-Flex stainless is 40% lighter and has an average of 14% larger ID than our premium stainless braided rubber hose. Being PTFE resin it has a large range of applications: Fuel, Oil, Water, Methanol, and Air as well as a very high vacuum rating - 29Hg. The new stainless hose also accepts all of the same hose ends and crimp collars made for the Kevlar® Ultra-Flex line. This means that the same crimper and dies used for the Kevlar® hose can be used with the new stainless, so your Earl's Universal crimper and dies are all you need for all of your high end line assemblies. (All trademarks are property of their respective owners.)
Features:
| Covered in aircraft quality 304 grade stainless steel wire | Earls Ultra-Flex |
| High-Temp. Smooth bore PTFE tubing | Works only with Earls UltraFlex Crimp Hose Ends |
| Convoluted outer wall of inner tube for increased flexibility | Emission code 5 |
| Remains Flexible at Temperatures Between -94°F and +510°F | Automatic Transmission Fluid, Bio-Fuels, Coolant, Diesel, E85, Methanol/Alcohol, Oil, Pump Gas, and Race Gas |
| Bend radius of 0.787" | Sold by foot in continous lengths |
| Clean and Fast Flowing | Max Vacuum 29 in Hg |
| Fluid Type Rating - Automatic Transmission Fluid |
✰✰✰✰✰ |
| Fluid Type Rating - Bio-Fuels |
✰✰✰✰✰ |
| Fluid Type Rating - Coolant |
✰✰✰✰✰ |
| Fluid Type Rating - Diesel |
✰✰✰✰✰ |
| Fluid Type Rating - E85 |
✰✰✰✰✰ |
| Fluid Type Rating - Methanol/Alcohol |
✰✰✰✰✰ |
| Fluid Type Rating - Oil |
✰✰✰✰✰ |
| Fluid Type Rating - Pump Gas |
✰✰✰✰✰ |
| Fluid Type Rating - Race Gas |
✰✰✰✰✰ |
| Fluid Type Rating - Vacuum |
✰✰✰✰✰ |
| PART# | 660604ERL | 660608ERL |
| Earls Crimping Die Part # | 12MM -D10012BERL | 19MM - D10019BERL |
|---|---|---|
| Hose Size | 4 AN | 8 AN |
| Inside Diameter | .270" | .536" |
| Max Working PSI | 1320 PSI | 1030 PSI |
| Min. Bend Radius | 1.52" | 1.496" |
| Outside Diameter | .378" | .650" |
| Final Crimp O.D. Range | .459"-.470" | .795"-.815" |
| PART # | 660610ERL | 660612ERL |
| Earls Crimping Die Part # | 22MM - D10022BERL | 25MM - D10025BERL |
|---|---|---|
| Hose Size | 10 AN | 12 AN |
| Inside Diameter | .658" | .780" |
| Max Working PSI | 955 PSI | 880 PSI |
| Min. Bend Radius | 1.772" | 1.968" |
| Outside Diameter | .819" | .961" |
| Final Crimp O.D. Range | .925"-.937" | 1.145"-.1.159" |
| PART# | 660616ERL |
| Earls Crimping Die Part # | 34MM - D10034BERL |
|---|---|
| Hose Size | 16 AN |
| Inside Diameter | 1.0039" |
| Max Working PSI | 740 PSI |
| Min. Bend Radius | 2.756" |
| Outside Diameter | 1.272" |
| Final Crimp O.D. Range | 1.335"-1.370" |
Engineer Preferred Fittings, Hose, Hose Ends & Components for Professional Level Projects
