XRP Stainless Hose - Sold by the foot
XRP stainless braid-protected synthetic rubber hose is the premium quality racing hose depended on by the top racing teams of every professional sanctioning body in the world. XRP features an inner liner of synthetic rubber. A partial coverage protective sheath of stainless steel braid is embedded in the liner during manufacturing. The reinforced hose liner is then bonded to a full-coverage outer protective sheath of high tensile stainless steel wire braid. Tougher than this, hose doesn't get. Yet, with its inner liner, remains flexible at temperatures between -40 and +350 degrees F. XRP hose is intended for use with Swivel-Seal, Auto-Fit and Auto-Crimp hose ends only. The use of other manufacturer's hose ends is not recommended. PSI rating is determined by many factors including hose end in use and assembly method.
Features:
| High-Temp. Synthetic Rubber | Brand XRP |
| Stainless Steel Inner Braid | Use with Auto-Crimp, Auto-Fit, Econ-O-Fit, and Swivel-Seal Hose Ends |
| Clean and Fast Flowing | Provides Constant Flow |
| Full Coverage Outer Braid | Mechanical Bond Between Layers |
| Sold per foot in continous lengths | Emmision Code 5 |
| Temperature Range -40° to 350° F | Automatic Transmission Fluid, Coolant, Diesel, E85, Methanol/Alcohol, Oil, Pump Gas, and Race Gas |
| Fluid Type Rating - Automatic Transmission Fluid |
✰✰✰✰✰ |
| Fluid Type Rating - Coolant |
✰✰✰✰✰ |
| Fluid Type Rating - Diesel |
✰✰ |
| Fluid Type Rating - E85 |
✰✰ |
| Fluid Type Rating - Methanol/Alcohol |
✰ |
| Fluid Type Rating - Oil |
✰✰✰✰✰ |
| Fluid Type Rating - Pump Gas |
✰✰ |
| Fluid Type Rating - Race Gas |
✰✰✰ |
| Fluid Type Rating - Vacuum |
✰✰✰✰✰ |
Â
| Part # | 300004XRP | 300006XRP |
| Hose Size | 4 AN | 6 AN |
| Inside Diameter | .219" | .344" |
| Max Working PSI | 1500 PSI | 1500 PSI |
| Min. Bend Radius | 2.0" | 2.25" |
| Outside Diameter | .436" | .547" |
| Part # | 300008XRP | 300010XRP |
| Hose Size | 8 AN | 10 AN |
| Inside Diameter | .438" | .563" |
| Max Working PSI | 1500 PSI | 1250 PSI |
| Min. Bend Radius | 3.5" | 4.0" |
| Outside Diameter | .641" | .797" |
| Part # | 300012XRP | 300016XRP |
| Hose Size | 12 AN | 16 AN |
| Inside Diameter | .688" | .875" |
| Max Working PSI | 1000 PSI | 750 PSI |
| Min. Bend Radius | 4.5" | 5.5" |
| Outside Diameter | .938" | 1.156" |
| Part # | 300020XRP |
| Hose Size | 20 AN |
| Inside Diameter | 1.125" |
| Max Working PSI | 500 PSI |
| Min. Bend Radius | 8.0" |
| Outside Diameter | 1.438" |
Â
Engineer Preferred Fittings, Hose, Hose Ends & Components for Professional Level Projects
Related Products
-
Straight Non-Swivel Hose End to A.N. Female - StainlessStarting at $116.00
-
90 Deg. Non-Swivel Hose End to A.N. Female - StainlessStarting at $146.95
-
