-6 St. / 45 Deg. PTFE Hose Assy - Aluminum Ends

Made in the USA.
ECONOMY SERIES pre-assembled #6 PTFE .030" wall hoses can be used for many uses where a carbon lined PTFE lined hose is preferred for a barrier to alcohol and various fuels, oils, and cooling fluids. Hoses are tested to 900 PSI before delivery. If you don't see it in here, call us for special assemblies. HOSE LENGTHS ARE MEASURED FLARE TO FLARE +/- 1/2". (not recommended for high pressure power steering or hydra boost systems)
All assemblies from ANplumbing are 100% made in the U.S.A by our in house technicians.
Maximum Pressure for these assemblies is recommended at 900 PSI for Stainless Steel Braid
-6 St. / 45 Deg. PTFE Hose Assy - Aluminum Ends
|
Bend Radius of 3.5" | Temperature range is -65°F to 500+°F |
Hose I.D .340" and is submersible. | Five Star Rating on All Fluids |
Made in U.S.A. | Stainless Steel Braid Assembly 900 PSI |
Smooth Bore internally | Carbon lined for static dissipation |
Wall Thickness .030" |