PRE-MADE -10 PTFE HOSES
Measurements in Inches
Made in the USA.
ECONOMY SERIES Pre-assembled #10 PTFE .030" wall hoses can be used for many uses where a carbon lined PTFE lined hose is preferred for a barrier to alcohol and various fuels, oils, and cooling fluids. Hoses are tested to 700 PSI before delivery. If you don't see it in here, call us for special assemblies. HOSE LENGTHS ARE MEASURED FLARE TO FLARE +/- 1/2". (not recommended for high pressure power steering or hydra boost systems)
PRO SERIES Pre Assembled -10 PTFE Hoses with XRP Pro Plus Hose and XRP Race Crimp Hose Ends are offered with ( XS) Stainless Steel Braid or (XM) Monofilament Braid. These are superior in flexibility and weight savings than our economy pre made hoses. All assemblies from ANplumbing are 100% made in the U.S.A by our in house technicians. Pro Plus PTFE Hose is smooth bore internally and carbon Lined with a convoluted exterior wall making it very flexible. Maximum Pressure for these assemblies is recommended at 870 PSI for Stainless Steel Braid and 250 PSI for Monofilament Braid. XRP Pro Plus Hose and Hose Ends are Made in the U.S.A. Hose is submersible. HOSE LENGTHS ARE MEASURED FLARE TO FLARE +/- 1/2". (not recommended for high pressure power steering or hydra boost systems)